Alloy 416 is available in Bar (Hexagon, Round, Square, Flat), Billet, Wire, Rod. For all stock availability of contact Sales.
| Grade | US Aerospace/Military | US Commercial | British Specification | European Specification | Other |
|
416 416Se |
AMS 5610 T2 Bar (free machining) QQ-S-763 QQ-S-764 MIL-W-52263 |
ASTM A484 / ASME SA484 ASTM A582 /ASME SA582 AISI 416 |
BS 970; 416S29 / 416S37 / 416S41 BS 970; 416S21 EN56AM/ EN56BM / EN56CM |
Werkstoff 1.4005 AFNOR Z12CF13 |
UNS S41600 EMS 537 |
| Chemical Composition Limits | |||||||||||
| Weight % | C | P | Si | Mn | S | Cr | Fe | Se | |||
| Alloy 416 Type 1 | 0.15 max | 0.060 max | 1 max | 1.25 max | 0.40 max | 11.50-13.50 | bal | 0.18-0.35 | |||
| Alloy 416 Type 2 | 0.15 max | 0.060 max | 1 max | 2.50 max | 0.40 max | 11.50-13.50 | bal | - | |||
Type 416 is a high chromium martensitic free-machining stainless steel. Type 416 can be hardened by heat treatment to higher strength and hardness level. Type 416 is used for any part that requires considerable machining, golf club heads, axles, gears and pinions, lead screws, valve trim. Type 416 is not recommended for vessels containing gases or liquids under high pressure.
| Material | Tempering Temp °F (°C) | 0.2 % Yield Strength (Mpa) | Tensile Strength (Mpa) | % Elongation in 2" | % Reduction of Area | Hardness Brinell |
| Alloy 416 1" round bar, hardened 1800 °F (982°C) oil quench, tempered one hour | 300 (149) | 1034 | 1344 | 10 | 40 | 390 |
| Alloy 416 1" round bar, hardened 1800 °F (982°C) oil quench, tempered one hour | 500 (260) | 979 | 1276 | 13 | 45 | 375 |
| Alloy 416 1" round bar, hardened 1800 °F (982°C) oil quench, tempered one hour | 700 (371) | 1007 | 1310 | 13 | 48 | 390 |
| Alloy 416 1" round bar, hardened 1800 °F (982°C) oil quench, tempered one hour | 900 (482) | 896 | 1158 | 14 | 50 | 341 |
| Alloy 416 1" round bar, hardened 1800 °F (982°C) oil quench, tempered one hour | 1000 (538) | 793 | 1000 | 15 | 50 | 300 |
| Alloy 416 1" round bar, hardened 1800 °F (982°C) oil quench, tempered one hours | 1100 (593) | 689 | 862 | 17 | 53 | 262 |
| Alloy 416 1" round bar, hardened 1800 °F (982°C) oil quench, tempered one hours | 1200 (650) | 586 | 758 | 18 | 55 | 225 |
Specifications
UNS S41600
Type 416 Ann Bar (Flat, Hex, Round, Square)
AMS 5610 T-2 Bar (free machining)
ASTM A 484 / ASME SA484
ASTM A 582 /ASME SA582
MIL W 52263
QQ S 763C
QQ S 764
AISI 416
Type 416 HT Bar (Round, Hex)
ASTM A 484 / ASME SA484
ASTM A 582 Cond T /ASME SA582
EMS 537
MIL W 52263
QQ S 763C Cond H
QQ S 764 Cond T
BS 970; 416S29 / 416S37 / 416S41
BS 970; 416S21
EN56AM/ EN56BM / EN56CM
Werkstoff 1.4005
AFNOR Z12CF13
Harsh Steel export Stainless Steel 416 to below countries.
Harsh steel is a major stockist and Exporter of Stainless Steel 416 to many countries of the world such as Singapore, Brisbane, Sydney, Melbourne, Australia, Houston, TX, San Diego, San Francisco, Atlanta, USA, Brentford, United Kingdom, Phoenix, Ireland, New Zealand and Canada, Western Australia , Queensland, New South Wales, South Australia, Victoria, Australian Capital Territory, Tasmania, Northern Territory, Ontario, British Columbia, Yukon Territory, Alberta, Manitoba, Saskatchewan, New foundland, Prince Edward Island, New Brunswick, Nova Scotia, Eastern Cape, Gauteng, Kwazulu-Natal, Western Cape, England, Scotland, Wales, Northern Ireland, Lagos, Abuja Capital Territory, Vadodara, Mumbai, Chennai, New Delhi, Mahape, Gurgaon, Noida, Bangalore, Coimbatore, Cochin, Ash Sharqiyah, Ar Riyad, Makkah, Dhahran, Riyadh, Jiddah, Jeddah, Masqat, Kwazulu-Natal, Gauteng, Western Cape, Free State, Eastern Cape, Alberta, Saskatchewan, British Columbia, Newfoundland, New Brunswick, Manitoba, Ontario, Nova Scotia, Quebec, Calgary, Edmonton, Vancouver, Toronto, Birmingham, Brentford, Manchester, Bristol, Sheffield, Milton Keynes, London, Poplar, Edinburgh, Thames Ditton.