Aluminium Alloy 2014 (2014A) is available in Bar, Sheet, Strip, Plate, Wire, Tube, Drawn Tube, Forging Stock and Rivet Stock. For all stock availability for Aluminum 1100 contact Sales.
| Alloy Designation | UK Specifications |
US Specifications |
US Federal Specifications |
European Specifications |
Other |
| 2014A A92014 |
BS 7 L37 2014A Rivet stock BS 3 L63 2014A-T6 tube BS 2 L77 2014A Forging stock BS 2 L87 2014A-T6 Bar BS 2 L93 2014A-T651 Plate BS L102 2014A-T4 Bar BS L103 2014A-T4 Forging Stock BS L105 2014A-T4 Drawn tube BS L156 2014A-T4 Bare Sheet BS L157 2014A-T6 Bare Sheet BS L158 2014A-T4 Bare Sheet, close tolerance BS L159 2014A-T6 Bare Sheet, close tolerance BS L163 2014A-T3 Clad Sheet BS L164 2014A-T4 Clad Sheet BS L165 2014A-T6 Clad Sheet BS L166 2014A-T4 Clad Sheet, close tolerance BS L167 2014A-T6 Clad Sheet, close tolerance BS L168 2014A-T6 / T6511 Bar DTD 5010 Plate DTD 5030 Clad plate DTD 5040 Clad plate BS H15, HS15, HP15, HT15, HE15 |
AMS 4028 2014-T0 Sheet/Plate AMS 4029 2014-T651 Sheet, plate AMS 4121 2014-T6/T6511 Bar AMS 4133 2014-T6 Forging AMS 4134 2014-T6 Die Forging AMS 4153 2014-T6 Extrusions |
QQ-A-200/2 2014-T4 Extruded bar QQ-A-200/2 2014-T6 Extruded bar QQ-A-225/4 2014-T4 Cold finished bar QQ-A-225/4 2014-T6 Cold finished bar QQ-A-250/3 2014-T4 Clad sheet QQ-A-250/3 2014-T6 Clad sheet QQ-A-367 MIL-A-21180 |
Werkstoff 3.1255 EN 2087 2014A-T6 Clad sheet EN 2088 2014A-T4 Clad sheet EN 2089 2014A-T6 Sheet EN 2100 2014A-T4511 Extruded bar EN 2324 2014A-T6 EN 2384 2014A-T6511 Extruded bar EN 2395 2014A-T4 Sheet EN 2634 2014A-T4511 Extruded bar EN 2635 2014A-T6511 Extruded bar, peripheral coarse grain control EN 2639 2014A-T6 |
A-U4SG AlCu4SiMg AECMA 2387 |
| Chemical Composition Limits | |||||||||||||
| Weight % | Al | Si | Fe | Cu | Mn | Cr | Mg | Ni | Zn | Ti+Zr | Ti | Other Each | Other Total |
| 2014a AECMA | Rem | 0.50 - 0.90 | 0.50 max | 3.9 - 5.0 | 0.4-1.2 | 0.10 max | 0.2-0.8 | 0.1 max | 0.25 max | 0.20 max | 0.15 max | 0.05 max | 0.15 max |
| 2014 USA | Rem | 0.50-1.20 | 0.7 max | 3.9 - 5.0 | 0.4 - 1.2 | 0.10 max | 0.2-0.8 | - | 0.25 max | - | 0.15 max | 0.05 max | 0.15 max |
Aluminium Alloy 2014 (2014 A) is a copper based alloy with very high strength together with excellent machining characteristics. Alloy 2014 is commonly used in many aerospace structural applications due to its high strength. Other applications include military vehicles, bridges, weapons manufacture and structural applications.
| Material | Temper | Thickness (mm) | Tensile Strength min (N/mm²) | Yield Strength min (N/mm²) | Elongation in 50 mm | ||||
| 0.5 mm | 0.8 mm | 1.3 mm | 2.6 mm | 3.0 mm | |||||
| 2014 Sheet | T4 Bare | 0.2-6.0 | 400 | 225 | 13 | 14 | 14 | 14 | 14 |
| 2014 Sheet | T6 Bare | 0.2-6.0 | 440 | 380 | 6 | 6 | 7 | 7 | 8 |
| 2014 Sheet | T4 Clad | 0.2-1.6 | 385 | 240 | 13 | 14 | 14 | - | - |
| 2014 Sheet | T4 Clad | 1.6-6.0 | 395 | 245 | - | - | - | 14 | 14 |
| 2014 Sheet | T6 Clad | 0.2-1.6 | 420 | 345 | 7 | 7 | 8 | - | - |
| 2014 Sheet | T6 Clad | 1.6-6.0 | 420 | 355 | - | - | - | 9 | 9 |
| Material | Temper | Diameter (mm) | Tensile Strength min (N/mm²) | Yield Strength (min) (N/mm²) | Elongation on 5.65 V (min) |
| 2014 Bar | T4 | <20 | 370 | 230 | 11 |
| 2014 Bar | T4 | 20-75 | 390 | 250 | 11 |
| 2014 Bar | T4 | 75-150 | 390 | 250 | 9 |
| 2014 Bar | T4 | 150-200 | 370 | 230 | 8 |
| 2014 Bar | T6510 | 20-75 | 480 | 435 | 7 |
| 2014 Bar | T6510 | 75-150 | 465 | 420 | 7 |
| 2014 Bar | T6510 | 150-200 | 435 | 390 | 7 |
Specifications
UNS A92014
Werkstoff Nr. 3.1255
Werkstoff Nr. 3.1254
AMS 4028 Sheet and Plate - Alloy 2014 T0
AMS 4029 Sheet and Plate - Alloy 2014 T651
AMS 4121 Bars, Rods, Wire (rolled or cold finished) - Alloy 2014 T6
AMS 4133 Forgings, Rolled Rings - Alloy 2014 T6
AMS 4134 Die Forgings - Alloy 2014 T4
AMS 4135 Superseded by 4133 Forgings, Rolled Rings - Alloy 2014 T6
AMS 4153 Extrusions - Alloy 2014 T6
BS 7L37 Rivet Stock
BS 3L63 Tube
BS H15, HS15, HP15, HT15, HE15.
AlCu4SiMg
A-U4SG
QQ-A-200/2
QQ-A-225/4
QQ-A-250/3
DTD 5010, Alloy 2014A
DTD 5030, DTD 5040
EN 2087
EN 2088
EN 2089 SHEET
EN 2395 SHEET
EN 2100 BAR T4511, EN 2634 BAR T4511
EN 2324 BAR, EN 2639 BAR, EN 2384, EN2635 T6, T6511
EN 2634 (with peripheral coarse grain control)
EN 2639 (with peripheral coarse grain control)
EN 2635 (with peripheral coarse grain control)
AECMA 2387
Harsh steel is a major stockist and Exporter of Aluminium Alloy 2014A to many countries of the world such as Singapore, Brisbane, Sydney, Melbourne, Australia, Houston, TX, San Diego, San Francisco, Atlanta, USA, Brentford, United Kingdom, Phoenix, Ireland, New Zealand and Canada, Western Australia , Queensland, New South Wales, South Australia, Victoria, Australian Capital Territory, Tasmania, Northern Territory, Ontario, British Columbia, Yukon Territory, Alberta, Manitoba, Saskatchewan, New foundland, Prince Edward Island, New Brunswick, Nova Scotia, Eastern Cape, Gauteng, Kwazulu-Natal, Western Cape, England, Scotland, Wales, Northern Ireland, Lagos, Abuja Capital Territory, Vadodara, Mumbai, Chennai, New Delhi, Mahape, Gurgaon, Noida, Bangalore, Coimbatore, Cochin, Ash Sharqiyah, Ar Riyad, Makkah, Dhahran, Riyadh, Jiddah, Jeddah, Masqat, Kwazulu-Natal, Gauteng, Western Cape, Free State, Eastern Cape, Alberta, Saskatchewan, British Columbia, Newfoundland, New Brunswick, Manitoba, Ontario, Nova Scotia, Quebec, Calgary, Edmonton, Vancouver, Toronto, Birmingham, Brentford, Manchester, Bristol, Sheffield, Milton Keynes, London, Poplar, Edinburgh, Thames Ditton.